Search in Category
Filter Your Search
Brand
Shop by Category
Accessories
SHUTTLE VALVE 1/4" SS LOW TEMP
Stainless Steel Shuttle Valve
The VERSA Shuttle Valves are constructed of 316 stainless steel with resilient seals providing tight shut-off. Shuttle Valves are 3/2 valves primarily used to charge and discharge a pressure line or chamber from two – or more – sources. When a pressure signal enters the port blocked by the shuttle, it will cause the shuttle to shift toward the high-pressure port.
Product Features
- Constructed of SAE 316L marine grade stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
- Low-temperature Buna o-ring seals for low-temperature applications down to -40°F
100% Leak Tested • 10-Year Warranty
2" 316SS GAUGE
Stainless Steel Pneumatic Gauge
The VERSA Pressure Gauge includes a stainless steel case with a 1/4 inch NPT connection (male thread) center back. Available in 2” and 2.5” diameters. Option for glycerine filled.
Product Features
- Constructed of SAE 316 stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
100% Leak Tested • 10-Year Warranty
BLOCK AND BLEED 1/4"
Stainless Steel Block & Bleed Valve
The VERSA Block and Bleed valve is a traditional isolation valve. It is designed to first isolate and then vent downstream pressure during gauge changes.
Product Features
- Constructed of SAE 316 stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
- FKM o-ring seals perform reliably with exposure to hydrocarbons or highly corrosive fluids over a broad temperature range: equivalent to Viton®, Fluorel®
100% Leak Tested • 10-Year Warranty
BLEED CONTROL 1/4" NICKEL PLATED
Brass Bleed Control Valve
The VERSA brass Bleed Control Valves provide economical, effective flow control in pneumatic applications. The Bleed Control Valve screws into the exhaust port of any VERSA directional control valve to offer built-in cylinder speed control.
Product Features
- Constructed of forged brass with electroless nickel plating for increased wear resistance, hardness and corrosion protection. Long-lasting performance in the most demanding conditions
100% Leak Tested • 10-Year Warranty
Bleed Control (3/4-14 NPT), SS
Stainless Steel Bleed Control Valve
The VERSA stainless steel Bleed Control Valves provide economical, effective flow control in pneumatic applications. They can be screwed into the exhaust port of any VERSA directional control valve to offer “built-in” cylinder speed control.
Product Features
- Constructed of SAE 316L marine grade stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
100% Leak Tested • 10-Year Warranty
Check Valve 1/4" NPT SST
Stainless Steel Check Valve
The VERSA Check Valve is a 316 stainless steel, NACE-compliant device designed to prevent reverse flow in a pneumatic circuit. The Check Valve allows unrestricted full flow in one direction and blocked “bubble tight” sealing in reverse. Rather than the classic ball design found in many valves, VERSA’s unique shuttle-based design is the key to full flow.
Product Features
- Constructed of SAE 316L marine grade stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
- FKM o-ring seals perform reliably with exposure to hydrocarbons or highly corrosive fluids over a broad temperature range: equivalent to Viton®, Fluorel®
100% Leak Tested • 10-Year Warranty
VERSA
Stainless Steel Check Valve
The VERSA Check Valve is a 316 stainless steel, NACE-compliant device designed to prevent reverse flow in a pneumatic circuit. The Check Valve allows unrestricted full flow in one direction and blocked “bubble tight” sealing in reverse. Rather than the classic ball design found in many valves, VERSA’s unique shuttle-based design is the key to full flow.
Product Features
- Constructed of SAE 316L marine grade stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
- FKM o-ring seals perform reliably with exposure to hydrocarbons or highly corrosive fluids over a broad temperature range: equivalent to Viton®, Fluorel®
100% Leak Tested • 10-Year Warranty
Versa Needle Valve
Stainless Steel Needle Valve
The Versa needle valve is a 316 stainless steel, NACE compliant device designed to meter flow in a pneumatic circuit.
Product Features
- Constructed of SAE 316L marine grade stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
- Low-temperature Buna o-ring seals for low-temperature applications down to -40°F
100% Leak Tested • 10-Year Warranty
VERSA
Stainless Steel Needle Valve
The Versa needle valve is a 316 stainless steel, NACE compliant device designed to meter flow in a pneumatic circuit.
Product Features
- Constructed of SAE 316L marine grade stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
- FKM o-ring seals perform reliably with exposure to hydrocarbons or highly corrosive fluids over a broad temperature range: equivalent to Viton®, Fluorel®
100% Leak Tested • 10-Year Warranty
Versa Needle Vavle
Stainless Steel Needle Valve
The Versa needle valve is a 316 stainless steel, NACE compliant device designed to meter flow in a pneumatic circuit.
Product Features
- Constructed of SAE 316L marine grade stainless steel conforming to NACE standard MR-01-75 suitable for direct exposure to sour environments
- Low-temperature Buna o-ring seals for low-temperature applications down to -40°F
100% Leak Tested • 10-Year Warranty
